Bisq Won’t Open on Windows? How to Check What’s Blocking It

By Mark Ellis · Checked November 19, 2026 · Case observed with Bisq 2 v2.1.15 on Windows 11

If Bisq appears in Task Manager but no window opens, check Windows notifications and the Bisq startup log before reinstalling. In the case documented here, Windows blocked a JavaFX component used by Bisq. The application opened after Smart App Control was switched off. That result applies to this case; it does not explain every startup failure.

I encountered a confusing startup problem: Bisq appeared as a background process, but there was no usable window. Later attempts closed without an obvious message.

This guide explains how I narrowed down the cause, which checks were useful, and why changing the graphics setting did not solve the problem. It covers the Bisq 2 desktop application. Bisq 1 has a different installation and data directory.

Start by identifying the symptom

What you see What to check next
Bisq is running, but no window is visible Check Alt + Tab and the notification area, then inspect Windows notifications.
“Windows protected your PC” Read the SmartScreen warning and verify the download source and installer.
“Part of this app has been blocked” Record the component name and investigate Smart App Control or the applicable policy.
Bisq closes without a message Check the latest entries in bisq.log.
The window opens, but network loading stalls Investigate connectivity separately. This is different from a failure to create the application window.

1. Check whether the window is simply hidden

Press Alt + Tab and look for Bisq. Also check the notification area beside the Windows clock, including hidden icons.

If there is no window, open Task Manager with Ctrl + Shift + Esc. Look for Bisq or a process with the Bisq icon. In my case, its description appeared as “A decentralized bitcoin exchange network”.

If this is a failed startup and the application is not doing useful work, end that Bisq process before trying again. Launch it once and allow time for startup rather than repeatedly opening the shortcut.

Keep your data directory intact. Deleting a profile or clearing application data is not a sensible first response to an unexplained startup failure. Back up important application data before making changes.

2. Read the exact Windows warning

SmartScreen and Smart App Control are different protections. A SmartScreen warning about an unfamiliar installer is not the same as Smart App Control preventing a component from loading.

The notification in this case said that some application features might not work because Windows could not confirm the publisher of prism_d3d.dll.

That file belongs to the JavaFX graphics components used by the application. The message identified a blocked component; it did not, by itself, establish that the installer contained malware.

Equally, downloading from an official source is not a reason to ignore every warning. Check the source and follow the release verification instructions. Our downloads page brings together the official download routes.

3. Find the matching event in Windows

If the notification disappears, Windows Event Viewer may provide the details:

  1. Search the Start menu for Event Viewer.
  2. Open Applications and Services Logs.
  3. Navigate to Microsoft → Windows → CodeIntegrity → Operational .
  4. Look at events around the time of the failed launch. Use Find to search for the component named in the notification.
  5. Check the executable, file path, timestamp and message.

In my investigation, event 3077 named Bisq2.exe and the JavaFX prism_d3d.dll file. The message said that the component did not meet the signing requirements or violated a code-integrity policy.

The event number alone is not enough. An unrelated event involving another program or DLL does not explain why Bisq failed. Match the file and the launch time.

4. Check the Bisq log if no warning appears

On the Windows installation used for this case, the Bisq 2 log was in:

%APPDATA%\Bisq2\bisq.log

Paste %APPDATA%\Bisq2 into the File Explorer address bar and open bisq.log in a text editor. The data location may differ if you configured a custom directory.

Go to the end of the file and check the timestamp of the latest startup attempt. Search nearby for ERROR, Exception or UnsatisfiedLinkError.

The relevant error in this case included:

java.lang.UnsatisfiedLinkError:
no glass in java.library.path

The glass name refers to a JavaFX component involved in creating the desktop interface. The log showed a loading failure even though glass.dll was present on disk.

This error does not always mean the same thing. A missing file, an unavailable dependency or a loading restriction can require different fixes. Here, the separate Windows block event and the later startup result pointed to the application-control restriction.

What I tried, and what actually changed the result

I first tried software rendering with the Java option -Dprism.order=sw. It did not restore the window. The later log still showed that JavaFX could not load its windowing component.

I am recording that failed attempt because a graphics option should not be presented as a confirmed fix for this problem.

Bisq opened after Smart App Control was switched off. This strongly supported the blocking diagnosis in this particular setup. It did not repair or digitally sign the affected files.

Turning off Smart App Control changes protection for the computer, not just for Bisq. It is not a per-app permission. Re-enabling it can cause the same application to be blocked again. Keep Microsoft Defender and other antivirus protection enabled.

Can you allow only Bisq through Smart App Control?

Microsoft currently says that Smart App Control does not provide an exception for one specific application. An antivirus exclusion is not the same as a Smart App Control exception.

Microsoft recommends contacting the application developer about signing the affected software. Its current guidance also says that recent Windows updates allow Smart App Control to be re-enabled without a clean installation. Availability depends on the device and Windows setup, so read the warning shown on your own computer before changing it.

You can inspect the setting under Windows Security → App & browser control → Smart App Control settings . On a managed work computer, contact the administrator rather than changing security policy.

See Microsoft’s Smart App Control FAQ for the current limitations and behaviour.

What to send to support

If you prefer to keep Smart App Control enabled, report the specific blocked component and check for an updated release. Do not assume that reinstalling the same package will resolve a signing-policy block.

A useful report includes:

  • The Bisq version and Windows version.
  • Whether a background process remains or closes.
  • The exact notification or error text.
  • The blocked DLL name and matching event timestamp.
  • A short, relevant excerpt from the startup log.
  • Any changes already tried and their results.

Remove your Windows account name, computer name, private file paths and other personal information before sharing a report publicly. Do not upload a full data-directory backup or private keys.

Find the appropriate channels on our Contact & Support page. If a log points to a different error, investigate that error instead of applying the Smart App Control explanation to every failure.

Common questions

Why is Bisq in Task Manager but not on my screen?

A process can start before the desktop window is created. In the case described here, loading a JavaFX component failed. A hidden window or another startup error can produce a similar symptom, so check the notifications and current log.

Does an unknown-publisher warning mean Bisq is a virus?

Not by itself. It can reflect an unsigned or unrecognised file. Verify where you obtained the installer and check its release signature. A warning is evidence to investigate, not proof of either safety or malware.

Does a verified PGP signature prevent Windows blocking?

No. PGP release verification and the trust checks used by Windows are different mechanisms. An installer can pass the release-signature check while Windows still blocks a component it tries to load.

Should I download glass.dll from a DLL website?

No. Do not replace application components with files from an unrelated download site. In this case the file was already present, so downloading another copy would not address the confirmed policy-block evidence.

Do I need to delete my Bisq profile or reinstall Java?

Neither is established as a fix by this case. Preserve your application data and identify the actual error first. The observed failure involved the application’s JavaFX components and Windows application control.

Can I turn protection back on after Bisq opens?

Check the options available on your Windows installation. Re-enabling Smart App Control does not grant Bisq permanent permission, and a future launch may be blocked again. Successful startup with it disabled is a diagnostic result, not a permanent exception.

Once Bisq opens

If you are setting up the application for the first time, continue with the Bisq Easy setup walkthrough . When you reach the offerbook, our guide to comparing Bisq Easy offers explains prices, payment methods and seller reputation.